Electromagnetic Flowmeter Is Easy To Maintain And Maintain

The electromagnetic flowmeter is simply composed of a flow sensor transmitter. The installation requirement of the electromagnetic flowmeter is that it must be installed at the lowest point of the pipeline or the vertical section of the pipeline, but it must be in the case of a full pipe. use and precision requirements.
The measurement principle of the electromagnetic flowmeter does not depend on the characteristics of the flow rate. If there is a certain amount of turbulence and vortex in the pipeline in the non-measurement area (such as: elbows, tangential flow restrictions, or half-open stop valves upstream), it will be related to the measurement irrelevant.
1. The flowmeter should not be installed in places where the temperature changes greatly or is exposed to high-temperature radiation from the equipment. If it must be installed, measures for heat insulation and ventilation must be provided.
2. It is best to install the flowmeter indoors. If it must be installed outdoors, rainwater, flooding and sun exposure should be avoided, and moisture-proof and sun-proof measures must be taken.
3. The flowmeter should be avoided to be installed in an environment containing corrosive gas, and ventilation measures must be taken when it must be installed.
4. In order to facilitate installation, maintenance and maintenance, there must be sufficient installation space around the flowmeter.
5. The installation site of the flowmeter should avoid magnetic fields and strong vibration sources. If the pipeline vibrates greatly, there should be supports for fixing the pipeline on both sides of the flowmeter.